Call Us Now
+86-15190367399
(5000T YEARLY-THREE SHIFTS)
1-ROD WIRE PRETREATMENT LINE
2-LZ600 DRAWING MCHINE
3-FINE WIRE DRAWING MACHINE LZ400
4-COPPER COATING MACHINE LINE
5-PRECISION LAYER WINDING MACHINE AND SHRINK PACK
First Wire surface pretreatment line
1. Equipment comprising and technical requirement
(1) Vertical pay-off machine：with 2.5T wire coil loading, wire confusion EMG stop
(2) YCX08 non acid drawing descaler machine
(3) Electrolytic pickling machine:
(4) Heating water channel unit：
(5) High frequency induction dryer
2. Main technical parameter
① Steel wire running speed： not less than 1.5m/s
② The washing water pressure which is supplied by user：more than 0.2 Mpa
③ The uninterrupted compression air which is supplied by user： more than 0.6 Mpa.
Second LZ600 and LZ400 Straight Line Drawing machine (Group)
1. Equipment comprising
(1) Wire drawing machine (group)
(2) 800mm spool take-Up machine
(3) Man-machine interface control contact screen
(4) Whole set of electric console
2. Main technical parameter ( key points)：
Specs (mm) | No. Of Drafts | Max. Inlet wire (mm) | Min. Outlet wire (mm) | Motor Power (KW) | Max. Speed (m/s) | Noise dB(A) |
Φ250 | 9-12 | 1.8 | 0.35 | 2.2-4 | 12 | 80-82 |
Φ350 | 6-12 | 3.5 | 0.6 | 7.5-11 | 20 | 80-82 |
Φ400 | 6-12 | 4.2 | 0.75 | 11-15 | 20 | 80-82 |
Φ450 | 6-12 | 4.6 | 0.85 | 15-22 | 18 | 80-82 |
Φ500 | 6-12 | 5.5 | 1.0 | 22-37 | 18 | 80-82 |
Φ560 | 6-12 | 6.5 | 1.3 | 22-45 | 18 | 80-82 |
Φ600 | 5-10 | 7.0 | 1.8 | 37-55 | 16 | 80-82 |
Φ700 | 4-9 | 8.0 | 2.4 | 45-75 | 12 | 80-82 |
Φ800 | 4-9 | 10 | 2.8 | 55-90 | 10 | 80-82 |
Φ900 | 4-9 | 14 | 3.5 | 75-132 | 8 | 80-82 |
Third chemically copper coating machine
One the main process chart
Spool pay off (including Dancer and pulley) →mechanical degreasing →hot wash →Rough electrolytic alkali washing →Fine electrolytic alkali washing(Air blowing) →Degrease and hot wash →cold water and neutralization →electrolytic pickling →cold water wash → Activation tank →copper coating Drying machine →pulley and separating wire →spool take-up machine
Fourth precision layer winding machine
(a) Equipment composition.
(1) Complete set of equipment:630(or 800 pay off) pay-off tension machine, distribution cabinets, layer wrapping machine
(2) Layer wrapping machine technology parameters
Serial program parameters
Serial | program | parameters |
1 | wrapping speed | highest wrapping speed≥20m/s |
2 | production capacity | 2.8 tons/shift (φ1.0, 8 hours) |
3 | Size of layer wrapping | φ0.8～1.6 |
4 | h-wheel specifications | 630（according to the user provide drawing)） |
5 | specifications of wire rod | φ150 (base dia) xφ270 (outer dia) x 90 (wide) x 20 kilograms |
Weight precision ≦ 0.3%.
please tell me your technical requirements we can make project with quotation as per your needs.
(5000T YEARLY-THREE SHIFTS)
1-ROD WIRE PRETREATMENT LINE
2-LZ600 DRAWING MCHINE
3-FINE WIRE DRAWING MACHINE LZ400
4-COPPER COATING MACHINE LINE
5-PRECISION LAYER WINDING MACHINE AND SHRINK PACK
First Wire surface pretreatment line
1. Equipment comprising and technical requirement
(1) Vertical pay-off machine：with 2.5T wire coil loading, wire confusion EMG stop
(2) YCX08 non acid drawing descaler machine
(3) Electrolytic pickling machine:
(4) Heating water channel unit：
(5) High frequency induction dryer
2. Main technical parameter
① Steel wire running speed： not less than 1.5m/s
② The washing water pressure which is supplied by user：more than 0.2 Mpa
③ The uninterrupted compression air which is supplied by user： more than 0.6 Mpa.
Second LZ600 and LZ400 Straight Line Drawing machine (Group)
1. Equipment comprising
(1) Wire drawing machine (group)
(2) 800mm spool take-Up machine
(3) Man-machine interface control contact screen
(4) Whole set of electric console
2. Main technical parameter ( key points)：
Specs (mm) | No. Of Drafts | Max. Inlet wire (mm) | Min. Outlet wire (mm) | Motor Power (KW) | Max. Speed (m/s) | Noise dB(A) |
Φ250 | 9-12 | 1.8 | 0.35 | 2.2-4 | 12 | 80-82 |
Φ350 | 6-12 | 3.5 | 0.6 | 7.5-11 | 20 | 80-82 |
Φ400 | 6-12 | 4.2 | 0.75 | 11-15 | 20 | 80-82 |
Φ450 | 6-12 | 4.6 | 0.85 | 15-22 | 18 | 80-82 |
Φ500 | 6-12 | 5.5 | 1.0 | 22-37 | 18 | 80-82 |
Φ560 | 6-12 | 6.5 | 1.3 | 22-45 | 18 | 80-82 |
Φ600 | 5-10 | 7.0 | 1.8 | 37-55 | 16 | 80-82 |
Φ700 | 4-9 | 8.0 | 2.4 | 45-75 | 12 | 80-82 |
Φ800 | 4-9 | 10 | 2.8 | 55-90 | 10 | 80-82 |
Φ900 | 4-9 | 14 | 3.5 | 75-132 | 8 | 80-82 |
Third chemically copper coating machine
One the main process chart
Spool pay off (including Dancer and pulley) →mechanical degreasing →hot wash →Rough electrolytic alkali washing →Fine electrolytic alkali washing(Air blowing) →Degrease and hot wash →cold water and neutralization →electrolytic pickling →cold water wash → Activation tank →copper coating Drying machine →pulley and separating wire →spool take-up machine
Fourth precision layer winding machine
(a) Equipment composition.
(1) Complete set of equipment:630(or 800 pay off) pay-off tension machine, distribution cabinets, layer wrapping machine
(2) Layer wrapping machine technology parameters
Serial program parameters
Serial | program | parameters |
1 | wrapping speed | highest wrapping speed≥20m/s |
2 | production capacity | 2.8 tons/shift (φ1.0, 8 hours) |
3 | Size of layer wrapping | φ0.8～1.6 |
4 | h-wheel specifications | 630（according to the user provide drawing)） |
5 | specifications of wire rod | φ150 (base dia) xφ270 (outer dia) x 90 (wide) x 20 kilograms |
Weight precision ≦ 0.3%.
please tell me your technical requirements we can make project with quotation as per your needs.
