FCW line technical details

Flux-cored welding wire, also known as tubular welding wire, can easily design welding materials for different purposes by adjusting the type and proportion of flux-cored additives. Because its alloy composition can be adjusted flexibly and conveniently, many flux-cored welding wires The variety is solid welding wire that cannot be smelted and rolled.

As early as the early 1950s, gas shielded flux-cored welding wire began to be developed and marketed, but it was not widely used commercially until 1957. This method can be said to be derived from the combination of the advantages of submerged arc welding and CO2 welding (referring to solid). The flux is wrapped in the welding wire and protected by the surrounding CO2 gas, which can produce a softer and more stable arc and low spatter during welding. its characteristics. At the beginning of development, only large diameter wire (2.0-4.0mm) was used for flat and horizontal welding of major workpieces. It was not until 1972 that the development of small wire diameter welding wire greatly expanded the field of flux-cored welding wire.

Self-shielded flux-cored wire was developed shortly after the gas shielded flux-cored wire market and was quickly recognized by the industry for specific uses.

Our main machine is flux cored wire drawing machine,flux cored wire drum packing machine,flux cored layer winding machine,flux cored roller forming machine and so on.