Flux Cored Strip Rewinding Machine

The first Product model and name

1. Product name: WY03(strip pay off machine)+GZL00(dancer)+SD800 steel strip rewinding machine(take-up machine)

2. Product appearance diagram: see Figure 1

The second Applicable scope

This unit is mainly used for the purpose of pay off and take up steel strips.

Third main technical parameters

1. Steel strip width (mm): 14mm

2. Power of belt pay off motor: 5.5KW

3. Take-up motor power: 11KW

4. Strip arrange: servo motor ball screw wire arrangement

5. Tension control: Adjusting the tension of the cam

6. Wire take up machine speed (m/min): 5m/s  4-6 m/s (common speed)

7. Wire take up spool diameter (mm): 800mm

8. air supply: 0.5-0.6Mpa, clean and dry oil mist removal air source

9. Braking time: Normal braking ≤ 60S

Quick braking ≤ 10S

Emergency braking ≤ 3S

10. Noise (dB): ≤ 85