Call Us Now
+86-15190367399
| Quantity: | |
|---|---|
Low carbon wire drawing machine line (5.5 or 6.5-2)
Straight line wire drawing machine line LZ9/600
Pretreatment (Vertical pay off machine+descaler machine)+LZ9/600 drawing machine+take up machine.
pretreatment line
(1)Vertical pay-off machine .steel weld-ment structure, and the staircase, safety fence is 5.5 meters high, with disorder wire stopping device, the disorderly wire (when knot) pass throught alarm device system, stop after about five meters when wire is broken
(2)YCX08 non-acid shelling machine, steel structure, full closing, no pollution. 4 shell wheel (shell wheel Ф 140mm) that make steel wire bending, omni-directional 360 ° shell derusting effect is good. total power 12KW, four derusting the diameter 420mm, the brushed steel brush the wire for friction derusting, normal use of certain time (as per the derusting effect) adjust rust steel brush, adjust once per round forwards 5mm in steel brush, the speed of the machine march with speed of drawing machine
1 Machine included:
(1) LZ9/600 straight line drawing machine
(2) tensile rack devices
(3) Ф800 spool take-up machines
(4) with human-machine interface touch screen control work station
(5) complete electrical control cabinet
2 main technical parameters and points:
(1) biggest inlet strength: 450MPa or less
(2) the inlet diameter: Ф 5.5 or 6.5 mm
(3) minimum outlet diameter Ф2.0 mm
(4) max compression ratio: 90.5%
(5)the highest drawing speed 16-12 m/s, normal speed:8-10m/s
(6) water and water pressure: 8 m³/h water pressure 0.25 Mpa or more
(7)air and pneumatic: 2.0 m³/h Air pressure 0.6 Mpa or more
(8)motor A)the first use gear box of 37KW,the second to ninth 22 KW,AC conversion motor
B)Take-up machine 18KW ac frequency conversion motor,
(9) block: straight line type,diameter is 600mm
block materials: stainless steel,ZG45 - 55,working surface, tungsten carbide spraying alloy powder, hardness more than HRC60 finish.32 Ra or less
Using life: two years or more, since wear chamfer, free replacement.
block cooling way: inner by slit type water-cooling, The outer cooled by ring air
(10)mould(die) box adopts welded parts, surface of guide wheel or roller spraying tungsten carbide rod, using life is one year, since wear chamfer, free replacement.
mode box body are two parties: lubrication powder body and the water body of indirect cooling
mould(die) box can be adjusted universally to ensure the angle of wire drawing
Low carbon wire drawing machine line (5.5 or 6.5-2)
Straight line wire drawing machine line LZ9/600
Pretreatment (Vertical pay off machine+descaler machine)+LZ9/600 drawing machine+take up machine.
pretreatment line
(1)Vertical pay-off machine .steel weld-ment structure, and the staircase, safety fence is 5.5 meters high, with disorder wire stopping device, the disorderly wire (when knot) pass throught alarm device system, stop after about five meters when wire is broken
(2)YCX08 non-acid shelling machine, steel structure, full closing, no pollution. 4 shell wheel (shell wheel Ф 140mm) that make steel wire bending, omni-directional 360 ° shell derusting effect is good. total power 12KW, four derusting the diameter 420mm, the brushed steel brush the wire for friction derusting, normal use of certain time (as per the derusting effect) adjust rust steel brush, adjust once per round forwards 5mm in steel brush, the speed of the machine march with speed of drawing machine
1 Machine included:
(1) LZ9/600 straight line drawing machine
(2) tensile rack devices
(3) Ф800 spool take-up machines
(4) with human-machine interface touch screen control work station
(5) complete electrical control cabinet
2 main technical parameters and points:
(1) biggest inlet strength: 450MPa or less
(2) the inlet diameter: Ф 5.5 or 6.5 mm
(3) minimum outlet diameter Ф2.0 mm
(4) max compression ratio: 90.5%
(5)the highest drawing speed 16-12 m/s, normal speed:8-10m/s
(6) water and water pressure: 8 m³/h water pressure 0.25 Mpa or more
(7)air and pneumatic: 2.0 m³/h Air pressure 0.6 Mpa or more
(8)motor A)the first use gear box of 37KW,the second to ninth 22 KW,AC conversion motor
B)Take-up machine 18KW ac frequency conversion motor,
(9) block: straight line type,diameter is 600mm
block materials: stainless steel,ZG45 - 55,working surface, tungsten carbide spraying alloy powder, hardness more than HRC60 finish.32 Ra or less
Using life: two years or more, since wear chamfer, free replacement.
block cooling way: inner by slit type water-cooling, The outer cooled by ring air
(10)mould(die) box adopts welded parts, surface of guide wheel or roller spraying tungsten carbide rod, using life is one year, since wear chamfer, free replacement.
mode box body are two parties: lubrication powder body and the water body of indirect cooling
mould(die) box can be adjusted universally to ensure the angle of wire drawing
