Low Carbon Wire Drawing Machinery

low carbon rough wire drawing machine LZ10/600

1 Machine included:

(1) LZ10/600 straight line drawing machine

(2) tensile rack devices

(3) Ф600 trunk type take up machine  

(4) with human-machine interface touch screen control work station

(5) complete electrical control cabinet

2.main technical parameters and points:

(1) biggest inlet strength:≦700MPa

(2) biggest inlet diameter: Ф8.0mm

(3) minimum outlet diameter:Ф2.0mm

(4) max compression ratio: 93.7% each block reduction is 24%

(5)the highest speed 14m/s, normal speed: 8-10m/s(finished wire 2.0mm)

The capacity 0.8 ton one hour

(6) water and water pressure: 6m³/h water pressure ≧0.25 Mpa

(7)air and pneumatic: 2.0 m³/h  Air pressure ≧0.6 Mpa

(8)motor :(A) the main motor: the first block 30KW, and the rest 22KW, AC conversion motor

（B）Take-up machine :15KW ac frequency conversion motor

(9) block: straight line type

A.diameter is 600mm----ten blocks

B. block materials: stainless steel,ZG45 - 55,working surface, tungsten carbide spraying alloy powder, hardness more than HRC60 finish.32 Ra or less

C. Using life: two years or more, since wear chamfer, free replacement.

D.block cooling way: inner by slit type water-cooling

(10)mould box adopts welded parts,surface of guide wheel or roller spraying tungsten carbide rod, using life is one year, since wear chamfer, free replacement.

(A) mode box body are two parties: lubrication powder body and the water body of directing cooling

(B)mode box can be adjusted universally to ensure the angle of wire drawing