Call Us Now
+86-15190367399
| Quantity: | |
|---|---|
Vertical pay off→descaler machine→LZ10/600 wire drawing machine→
dancer→Ø600 Trunk type take up machine
The first Wire pretreatment line
(1) vertical type pay-off stand,steel welding structure, and the staircase, safety fence is 5.5 meters high, with disorderly wire alarm parking device, the disorderly wire (when knot) pass through alarm device system, stop after about six meters
(2) YCX08 non acid drawing de-rusting machine, steel structure, full closing no pollution. 4 shell wheel (shell wheel Ф 140mm) that make steel wire bending, omni-directional 360 ° shell de-rusting effect is good. total power 12KW, four de-rusting the diameter 420mm, the brushed steel brush the wire for friction de-rusting, normal use of certain time (as per the de-rusting effect) adjust rust steel brush, adjust once per round forwards 5mm in steel brush, the speed of the machine march with speed of drawing
Machine
The second low carbon rough wire drawing machine LZ10/600
1 Machine included:
(1) LZ10/600 straight line drawing machine
(2) tensile rack devices
(3) Ф600 trunk type take up machine
(4) with human-machine interface touch screen control work station
(5) complete electrical control cabinet
2.main technical parameters and points:
(1) biggest inlet strength:≦700MPa
(2) biggest inlet diameter: Ф8.0mm
(3) minimum outlet diameter:Ф2.0mm
(4) max compression ratio: 93.7% each block reduction is 24%
(5)the highest speed 14m/s, normal speed: 8-10m/s(finished wire 2.0mm)
The capacity 0.8 ton one hour
(6) water and water pressure: 6m³/h water pressure ≧0.25 Mpa
(7)air and pneumatic: 2.0 m³/h Air pressure ≧0.6 Mpa
(8)motor :(A) the main motor: the first block 30KW, and the rest 22KW, AC conversion motor
（B）Take-up machine :15KW ac frequency conversion motor
(9) block: straight line type
A.diameter is 600mm----ten blocks
B. block materials: stainless steel,ZG45 - 55,working surface, tungsten carbide spraying alloy powder, hardness more than HRC60 finish.32 Ra or less
C. Using life: two years or more, since wear chamfer, free replacement.
D.block cooling way: inner by slit type water-cooling
(10)mould box adopts welded parts,surface of guide wheel or roller spraying tungsten carbide rod, using life is one year, since wear chamfer, free replacement.
Vertical pay off→descaler machine→LZ10/600 wire drawing machine→
dancer→Ø600 Trunk type take up machine
The first Wire pretreatment line
(1) vertical type pay-off stand,steel welding structure, and the staircase, safety fence is 5.5 meters high, with disorderly wire alarm parking device, the disorderly wire (when knot) pass through alarm device system, stop after about six meters
(2) YCX08 non acid drawing de-rusting machine, steel structure, full closing no pollution. 4 shell wheel (shell wheel Ф 140mm) that make steel wire bending, omni-directional 360 ° shell de-rusting effect is good. total power 12KW, four de-rusting the diameter 420mm, the brushed steel brush the wire for friction de-rusting, normal use of certain time (as per the de-rusting effect) adjust rust steel brush, adjust once per round forwards 5mm in steel brush, the speed of the machine march with speed of drawing
Machine
The second low carbon rough wire drawing machine LZ10/600
1 Machine included:
(1) LZ10/600 straight line drawing machine
(2) tensile rack devices
(3) Ф600 trunk type take up machine
(4) with human-machine interface touch screen control work station
(5) complete electrical control cabinet
2.main technical parameters and points:
(1) biggest inlet strength:≦700MPa
(2) biggest inlet diameter: Ф8.0mm
(3) minimum outlet diameter:Ф2.0mm
(4) max compression ratio: 93.7% each block reduction is 24%
(5)the highest speed 14m/s, normal speed: 8-10m/s(finished wire 2.0mm)
The capacity 0.8 ton one hour
(6) water and water pressure: 6m³/h water pressure ≧0.25 Mpa
(7)air and pneumatic: 2.0 m³/h Air pressure ≧0.6 Mpa
(8)motor :(A) the main motor: the first block 30KW, and the rest 22KW, AC conversion motor
（B）Take-up machine :15KW ac frequency conversion motor
(9) block: straight line type
A.diameter is 600mm----ten blocks
B. block materials: stainless steel,ZG45 - 55,working surface, tungsten carbide spraying alloy powder, hardness more than HRC60 finish.32 Ra or less
C. Using life: two years or more, since wear chamfer, free replacement.
D.block cooling way: inner by slit type water-cooling
(10)mould box adopts welded parts,surface of guide wheel or roller spraying tungsten carbide rod, using life is one year, since wear chamfer, free replacement.
