Call Us Now
+86-15190367399
LZ560
WANYI
84631020
| Quantity: | |
|---|---|
Main parameter of low carbon steel wire (7.0mm-2.7mm)drawing machine line
（1） Wire pretreatment line
(1) vertical type pay-off stand .steel weld-ment structure, and the staircase, safety fence is 5.5 meters high, with disorderly wire alarm parking device, the disorderly wire (when knot) pass throught alarm device system, stop after about six meters
(2) YCX08 non acid drawing derusting machine, steel structure, full closing no pollution. 4 shell wheel (shell wheel Ф 140mm) that make steel wire bending, omni-directional 360 ° shell derusting effect is good. total power 12KW, four derusting the diameter 420mm, the brushed steel brush the wire for friction derusting, normal use of certain time (as per the derusting effect) adjust rust steel brush, adjust once per round forwards 5mm in steel brush, the speed of the machine march with speed of drawing machine
Rough drawing LZ7/560 drawing machine
1 Machine included:
(1) LZ7/560 straight line drawing machine
(2) tensile rack devices
(3) Ф600 trunk type take up machine
(4) with human-machine interface touch screen control work station
(5) complete electrical control cabinet
2main technical parameters and points:
(1) biggest inlet strength: 700MPa or less
(2) biggest inlet diameter: Ф7.0mm
(3) minimum outlet diameter Ф2.7mm
(4) max compression ratio: 85.1% each block reduction is 23.8%
(5)the highest speed 10m/s, normal speed: 6-8m/s(finished wire 2.7mm)1.0 ton one hour
(6) water and water pressure: 6m³/h water pressure 0.25 Mpa or more
(7)air and pneumatic: 2.0 m³/h Air pressure 0.6 Mpa or more
(8)motor :(1) the main motor: the first block 30KW, and the rest 22KW, ac conversion motor
（2）Take-up machine :15KW ac frequency conversion motor
(9) block: straight line type: diameter is 560mm----seven blocks
2 block materials: stainless steel,ZG45 - 55,working surface, tungsten carbide spraying alloy powder, hardness more than HRC60 finish.32 Ra or less
3 Using life: two years or more, since wear chamfer, free replacement.
4 block cooling way: inner by slit type water-cooling
(10)mould box adopts welded parts, surface of guide wheel or roller spraying tungsten carbide rod, using life is one year, since wear chamfer, free replacement.
(2) mode box body are two parties: lubrication powder body and the water body of indirect cooling
3 mode box can be adjusted universally to ensure the angle of wire drawing
(11) tuning roller: adopt pneumatic anti-tension tuning, tension as per and the air pressure for adjusting, guide wheel is WC spraying, guide service life assurance for more than one year.The angular sensor,is Germany imported of non-contact sensor,die arrangement is wide, die automatic compensation after wear,no break-off
(2) using a separate control mechanism, ensure the tuning roller and swinging wire has no any relation direction, constant angle inlet can ㈠:ensure prolong the mould life 20% or more ㈡ensure stability of wire drawing dimension roundness, ㈢ ensure good linear stable for wire drawing
(12)transportation : (1) use level or two powerful V joint group belt transmission form for transmission of high transmission efficiency and long life
2 with pneumatic brake that electromagnetic valve control and high efficient
(13) cooling system: (1) the front panel has ball valve of water regulation that block cooling and die cooling and water calculation with Pointers considerations
2 the cooling system ensure normal production equipment surface temperature less than 60 C
3 total inflow water valve use electromagnetic water saving assolenoid style on-off valves with synchronous, water and the machine start or stop with synchronous, water saving 20% synchronization and guarantee cooling effect
(14) pneumatic system (1) pneumatic accessories: China's Taiwan production element AIRTIC
2the pneumatic system including instrument, piping, electromagnetic valve ,no-leak.
(15) rotation system: adopting the most famous Harbin bearing factory production of bearing, normal using time every year
Main parameter of low carbon steel wire (7.0mm-2.7mm)drawing machine line
（1） Wire pretreatment line
(1) vertical type pay-off stand .steel weld-ment structure, and the staircase, safety fence is 5.5 meters high, with disorderly wire alarm parking device, the disorderly wire (when knot) pass throught alarm device system, stop after about six meters
(2) YCX08 non acid drawing derusting machine, steel structure, full closing no pollution. 4 shell wheel (shell wheel Ф 140mm) that make steel wire bending, omni-directional 360 ° shell derusting effect is good. total power 12KW, four derusting the diameter 420mm, the brushed steel brush the wire for friction derusting, normal use of certain time (as per the derusting effect) adjust rust steel brush, adjust once per round forwards 5mm in steel brush, the speed of the machine march with speed of drawing machine
Rough drawing LZ7/560 drawing machine
1 Machine included:
(1) LZ7/560 straight line drawing machine
(2) tensile rack devices
(3) Ф600 trunk type take up machine
(4) with human-machine interface touch screen control work station
(5) complete electrical control cabinet
2main technical parameters and points:
(1) biggest inlet strength: 700MPa or less
(2) biggest inlet diameter: Ф7.0mm
(3) minimum outlet diameter Ф2.7mm
(4) max compression ratio: 85.1% each block reduction is 23.8%
(5)the highest speed 10m/s, normal speed: 6-8m/s(finished wire 2.7mm)1.0 ton one hour
(6) water and water pressure: 6m³/h water pressure 0.25 Mpa or more
(7)air and pneumatic: 2.0 m³/h Air pressure 0.6 Mpa or more
(8)motor :(1) the main motor: the first block 30KW, and the rest 22KW, ac conversion motor
（2）Take-up machine :15KW ac frequency conversion motor
(9) block: straight line type: diameter is 560mm----seven blocks
2 block materials: stainless steel,ZG45 - 55,working surface, tungsten carbide spraying alloy powder, hardness more than HRC60 finish.32 Ra or less
3 Using life: two years or more, since wear chamfer, free replacement.
4 block cooling way: inner by slit type water-cooling
(10)mould box adopts welded parts, surface of guide wheel or roller spraying tungsten carbide rod, using life is one year, since wear chamfer, free replacement.
(2) mode box body are two parties: lubrication powder body and the water body of indirect cooling
3 mode box can be adjusted universally to ensure the angle of wire drawing
(11) tuning roller: adopt pneumatic anti-tension tuning, tension as per and the air pressure for adjusting, guide wheel is WC spraying, guide service life assurance for more than one year.The angular sensor,is Germany imported of non-contact sensor,die arrangement is wide, die automatic compensation after wear,no break-off
(2) using a separate control mechanism, ensure the tuning roller and swinging wire has no any relation direction, constant angle inlet can ㈠:ensure prolong the mould life 20% or more ㈡ensure stability of wire drawing dimension roundness, ㈢ ensure good linear stable for wire drawing
(12)transportation : (1) use level or two powerful V joint group belt transmission form for transmission of high transmission efficiency and long life
2 with pneumatic brake that electromagnetic valve control and high efficient
(13) cooling system: (1) the front panel has ball valve of water regulation that block cooling and die cooling and water calculation with Pointers considerations
2 the cooling system ensure normal production equipment surface temperature less than 60 C
3 total inflow water valve use electromagnetic water saving assolenoid style on-off valves with synchronous, water and the machine start or stop with synchronous, water saving 20% synchronization and guarantee cooling effect
(14) pneumatic system (1) pneumatic accessories: China's Taiwan production element AIRTIC
2the pneumatic system including instrument, piping, electromagnetic valve ,no-leak.
(15) rotation system: adopting the most famous Harbin bearing factory production of bearing, normal using time every year
