Call Us Now
+86-15190367399
WANYI
| Quantity: | |
|---|---|
welding wire polishing machine
A-Functions and Features:
1. It can remove the wire drawing powder on the welding wire in 360° directions.
2. Vertical structure to reduce the floor space of the workstation
3. The pressure of the polishing unit is adjustable, and the pressure center is automatically adjustable.
4, with automatic anti-disconnection function.
5. The whole machine is fully sealed, no drawing dust overflows, environmental protection and no pollution.
6. Equipped with dust-removing air duct holes, which can be connected to external dust-collecting ventilation ducts.
7. Equipped with an intelligent pulse dust removal device, which can periodically and directly remove the drawing dust in turn.
8. PLC programmable controller control makes the equipment easy to operate and intelligent.
B-Technical data:
1. Power supply voltage: 380v/50HZ-60HZ,
2. Power used: 1200w, (370w polishing motor 380v three-phase X3 sets)
3. Air source: 0.6mpa
4. Diameter of wire wiper: φ400mm
5. Diameter of guide wheel: φ200mm
6. Brushed cloth reciprocating frequency: 6 times/min
7. Applicable wire diameter φ0.8mm-φ2.5mm,
8. Applicable wire speed is less than or equal to 1200m/min,
9. Dimensions: 2000mm (station) * 950mm (width) * 2050mm (height)
10. The welding wire is left in and out right, and the center height of the wire inlet hole is 900mm (can be declared when ordering a contract)
11. Weight of the whole machine: 870kg
12.4 dust collection ports, integrated into two upper and lower holes for output,
13. The polishing unit has a pressure equalization adjustment device, the pressure is adjustable,
14 equipped with velocity sampling detectors.
welding wire polishing machine
A-Functions and Features:
1. It can remove the wire drawing powder on the welding wire in 360° directions.
2. Vertical structure to reduce the floor space of the workstation
3. The pressure of the polishing unit is adjustable, and the pressure center is automatically adjustable.
4, with automatic anti-disconnection function.
5. The whole machine is fully sealed, no drawing dust overflows, environmental protection and no pollution.
6. Equipped with dust-removing air duct holes, which can be connected to external dust-collecting ventilation ducts.
7. Equipped with an intelligent pulse dust removal device, which can periodically and directly remove the drawing dust in turn.
8. PLC programmable controller control makes the equipment easy to operate and intelligent.
B-Technical data:
1. Power supply voltage: 380v/50HZ-60HZ,
2. Power used: 1200w, (370w polishing motor 380v three-phase X3 sets)
3. Air source: 0.6mpa
4. Diameter of wire wiper: φ400mm
5. Diameter of guide wheel: φ200mm
6. Brushed cloth reciprocating frequency: 6 times/min
7. Applicable wire diameter φ0.8mm-φ2.5mm,
8. Applicable wire speed is less than or equal to 1200m/min,
9. Dimensions: 2000mm (station) * 950mm (width) * 2050mm (height)
10. The welding wire is left in and out right, and the center height of the wire inlet hole is 900mm (can be declared when ordering a contract)
11. Weight of the whole machine: 870kg
12.4 dust collection ports, integrated into two upper and lower holes for output,
13. The polishing unit has a pressure equalization adjustment device, the pressure is adjustable,
14 equipped with velocity sampling detectors.
