Call Us Now
+86-15190367399
wet drawing machine,water tank wire drawbench
| Quantity: | |
|---|---|
1.1.1 Water tank type wire drawing machine
Water tank type wire drawing machine: composed of AC variable frequency motor, linked narrow V-belt, HTD synchronous belt, main shaft system, driven shaft system, and traction system (synchronous belt drive). The motor model is YVP-250M-6-37KW, with a protection level of IP44 and a working system of S1.
1.1.2 SX400 Elephant Nose Cable loader
Unloading machine: composed of AC variable frequency motor, V-belt, and spindle seat. The motor model is YVP-160L-6-11KW, with a protection level of IP44 and a working system of S1.
1.2 Rollers and tower wheels
The drum is made of cast steel substrate, and the working surface is treated with spray coating. The surface hardness HRC is ≥ 58, and the surface roughness Ra of the drawn surface is higher than 0.8 μ m.
The water tank tower wheel is made of cast steel substrate, and the working surface is treated with spray coating. The surface hardness HRC is ≥ 58, and the drawn surface roughness Ra is higher than 0.8 μ m.
1.3 Drawing die box
The external dimensions of the wire drawing mold are φ 30 × 20mm (outer diameter of the mold sleeve × length).
1.4 Tension adjustment mechanism
The tension mechanism (between the water tank type wire drawing machine and the wire unloading machine) is arranged in a vertical plane, and the loop mechanism is composed of a fixed wheel and a moving wheel to form a swinging mechanism, which adjusts the tension balance between the main machine and the wire unloading machine. The balancing force source is pneumatic, which adjusts the air supply pressure of the cylinder and can adjust the tension of the steel wire. The tension wheel adopts a segmented structure.
1.5 SX400 Elephant Nose Cable loader
The elephant nose winding machine consists of a transmission system, a guide wheel+straightener group, and a offline system.
Before leaving the factory, the winding reel group has been balanced, and the position of the straightener must be adjusted before operation.
1.1.1 Water tank type wire drawing machine
Water tank type wire drawing machine: composed of AC variable frequency motor, linked narrow V-belt, HTD synchronous belt, main shaft system, driven shaft system, and traction system (synchronous belt drive). The motor model is YVP-250M-6-37KW, with a protection level of IP44 and a working system of S1.
1.1.2 SX400 Elephant Nose Cable loader
Unloading machine: composed of AC variable frequency motor, V-belt, and spindle seat. The motor model is YVP-160L-6-11KW, with a protection level of IP44 and a working system of S1.
1.2 Rollers and tower wheels
The drum is made of cast steel substrate, and the working surface is treated with spray coating. The surface hardness HRC is ≥ 58, and the surface roughness Ra of the drawn surface is higher than 0.8 μ m.
The water tank tower wheel is made of cast steel substrate, and the working surface is treated with spray coating. The surface hardness HRC is ≥ 58, and the drawn surface roughness Ra is higher than 0.8 μ m.
1.3 Drawing die box
The external dimensions of the wire drawing mold are φ 30 × 20mm (outer diameter of the mold sleeve × length).
1.4 Tension adjustment mechanism
The tension mechanism (between the water tank type wire drawing machine and the wire unloading machine) is arranged in a vertical plane, and the loop mechanism is composed of a fixed wheel and a moving wheel to form a swinging mechanism, which adjusts the tension balance between the main machine and the wire unloading machine. The balancing force source is pneumatic, which adjusts the air supply pressure of the cylinder and can adjust the tension of the steel wire. The tension wheel adopts a segmented structure.
1.5 SX400 Elephant Nose Cable loader
The elephant nose winding machine consists of a transmission system, a guide wheel+straightener group, and a offline system.
Before leaving the factory, the winding reel group has been balanced, and the position of the straightener must be adjusted before operation.
